Spacer Plate for SME arm
 |
 |
For the fitting of an SME 3009 and 3012 Tone Arms on Garrard 301 and 401 Plinths. Raises the height of the arm to help compensate for the extra high platter of the Garrard decks. This Spacer Plate is positioned at the correct mounting distance using a rule or template and mounted directly onto the Plinth with number 6 woodscrews or machine screws and nuts if used on a non-wooden Plinth (not included). The arm is then attached to the Plate using the screws provided, this arrangement gives the arm a much more secure fixing than with other makes of SME Spacer.
Manufactured from military spec Aluminium to extremely tight tolerances with a high quality satin finish.
Spacer / Mount for Rega Arms
|
|
A Plate to allow fitting of a Rega RB250, RB300 or RB600 onto Garrard Plinths. Position on your Plinth with a rule or template and attach with number 6 woodscrews or machine screws if fixing to a non-wooden Plinth (not supplied). Plate is also compatible with Rega based arms from Origin Live, Michell etc and also the Roksan Tabriz. Compatible with our VTA set and Speed nut if you require extra height and fine tuning of VTA.
Manufactured from military spec Aluminium to extremely tight tolerances with a high quality satin finish.
Mounting Screws suitable for Garrard 301
|
 |
A set of 4 reproduction Stainless Steel Screws, Nuts and Washers for fixing a Garrard 301 to its Plinth. They are raised, Slotted Countersunk Screws with mirror polished heads. 50 MM (2") in length and can be cut down if required.