All these Plates / armboards are manufactured from military spec Aluminium to extremely tight tolerances with a high quality satin finish.
There are many models of Technics Turntables that the Plates below will suit, not only the SL1500. Generally if the Plate diameter needs to be 120 MM and it attaches to the deck with 4 screws it should fit. If unsure please contact us for guidance. May not fit the SL120 and SL150 as these have an extra deep Armboard recess.
Below is our standard off the shelf range but we have also manufactured special Mounting Plates for the Technics SL1500 etc to suit the following arms - Hadcock GH242, ADC, Grace 707, and Audio Technica AT1005 please contact us if you have a non standard requirement. These 4 hole Armboards are also available to special order for the Rega 3 point mounted arms such as the RB301 and also Jelco arms that require a 214 mounting distance.
As there have been many variations of Technics Turntables please check that your Deck has an Armboard recess diameter of 120 MM and attaches by 4 screws before ordering one of the following products.
SME 3009 Armboard for the SL1500 etc
 |
For the fitting of an SME 3009 Tone Arm, locates the arm at the correct geometry and VTA (Vertical Tracking Angle). Comes with Screws for fixing the arm to the Plate and Plate to the Turntable. Can be modified to suit the newer SME arm models. Please contact us for more info.
|
|
|
|