Products suitable for the Thorens TD125 MKI and MKII and TD126 MKI and MKII

All these Plates are manufactured from military spec Aluminium to exremely tight tolerances with a high quality satin finish.

The Mounting Plates below are designed to be fitted to the original TD125 / TD126 wooden Armboard and not a repacement for it and are ideal for covering over existing holes left by different types of Tone Arm which have previously been fitted to the deck. For fitting instructions for these Plates click here

 

 TD125 / TD126 Mounting Plate for SME3009

TD125 / SME3009 Mounting Plate 

TD125/ SME Armboard

For easy fitting of an SME 3009 Tone Arm, locates the arm at the correct geometry and VTA (Vertical Tracking Angle) when the Plate is correctly located and fitted. Also gives the SME arm a more secure fixing than if attached directly to the wooden Armboard. Comes with Screws for fixing the arm to the Plate and for fixing the Plate to the wooden Armboard. Suitable  for Thorens models - TD125 MKI and MKII and TD126 MKI and MKII.

Click here to buy

 
TD125 / TD126 Rega Mounting Plate
 

TD125 / Rega Armboard

 
 
A Plate for mounting Rega RB250 / RB300 and RB600 arms and other makes that are based on these models such as the Michell Technoarm and some Origin Live models. Locates the arm at the correct geometry and also raises the height of the arm slightly which is beneficial when using Rega arms on the TD150. Includes 4 screws for fixing the Plate to the wooden Armboard. Suitable  for Thorens models - TD150 MKI and TD150 MKII.
 
 
 
 
 
TD125 / TD126 Linn Mounting Plate

 

TD125 / Linn Mounting Plate

 
 
This Plate will allow easy fitting of Linn arms at the correct geometry and VTA (Vertical Tracking Angle) when fitted as per our instructions. Plate comes with screws for attaching the Plate to the original armboard. Suitable  for Thorens models - TD125 and TD126 MKI and TD125 and TD126 MKII.