Products suitable for the Thorens TD150 MKI and MKII

All these Plates are manufactured from military spec Aluminium to exremely tight tolerances with a high quality satin finish.

The Mounting Plates below are designed to be fitted to the original TD150 wooden Armboard and not a repacement for it and are ideal for covering over existing holes left by different types of Tone Arm whidh have previously been fitted to the deck. For fitting instructions for these Plates click here

 

 TD150 / SME Mounting Plate

 

TD150 / SME Mounting Plate

For easy fitting of an SME 3009 Tone Arm, locates the arm at the correct geometry and VTA (Vertical Tracking Angle) when the Plate is correctly located and fitted. Also gives the SME arm a more secure fixing than if attached directly to the wooden Armboard. Comes with Screws for fixing the arm to the Plate and for fixing the Plate to the wooden Armboard. Suitable  for Thorens models - TD150 MKI and TD150 MKII.

Click here to buy

 
TD150 / Rega Mounting Plate
 

TD150 / Rega

 TD150 / REGA
 
A Plate for mounting Rega RB250 / RB300 and RB600 arms and other makes that are based on these models such as the Michell Technoarm and some Origin Live models. Locates the arm at the correct geometry and also raises the height of the arm slightly which is beneficial when using Rega arms on the TD150. Includes 4 screws for fixing the Plate to the wooden Armboard. Suitable  for Thorens models - TD150 MKI and TD150 MKII.
 
 
 
 
 
TD150 / Linn Mounting Plate

 

TD150 / Linn

 
 
TD150 / LINN
 
This Plate will allow easy fitting of Linn arms at the correct geometry and VTA (Vertical Tracking Angle) when fitted as per our instructions. Plate comes with screws for attaching the Plate to the original armboard. Suitable  for Thorens models - TD150 MKI and TD150 MKII.